fbpx

Free delivery over £75

Try the ultimate electrical design service

1% for the Planet 

Cart 0

Sterling Galvanic Isolator 32A – Zinc Saver – Pro Save W (Waterproof)

Galvanic isolators protect your vessel from galvanic corrosion, and provide one-off protection from short circuits, power surges, and lightning strikes when connected to shore power.

  • Max continuous current 32A
  • Prevents anode wastage when connected to shore power
  • Fail-safe – in the event of a short circuit, power surge, or lightning strike, the diode in the isolator fails in the ‘safe’ position, protecting your vessel’s electrical systems
  • Fully IP68 waterproof
  • Warning LEDs for fault indication

£172.30

In stock - 1-2 Day Dispatch

£172.30

Confused about electrics? Our free electrical system design service makes off-grid energy simple.

Description

Sterling Galvanic Isolator 32A – Zinc Saver – Pro Save W – Waterproof marine galvanic isolator for corrosion protection

The Sterling galvanic isolator 32A is a fully waterproof and highly redundant device that provides protection from galvanic corrosion, and from short circuits and power surges in your vessel.

Why do you need a galvanic isolator?

Galvanic corrosion happens to all metal components on a boat that are exposed to seawater. Normally, your sacrificial anodes are enough protect your shaft and propeller from galvanic corrosion. However, when you connect to an onshore electrical hookup, safety demands that you also be connected to an onshore ground. This essentially creates a low voltage battery, incorporating your boat, the water, and the ground. Without any sort of protection, the current flow through this battery will significantly speed up the galvanic corrosion process.

You can protect against this battery effect by installing either a galvanic isolator or an isolation transformer.

Galvanic isolators and isolation transformers

Both galvanic isolators and isolation transformers achieve the same thing. They isolate your boat from the low voltage battery effect, protecting underwater metals from corrosion and preventing your sacrificial anodes from wasting too quickly. The difference is in how they achieve this.

A galvanic isolator is a small, lightweight device that prevents low voltage currents from passing between your boat and the shore. Because the battery effect current is generally less than 1V, it can’t pass, and your boat is protected. At the same time, high voltage currents, such as those that happen during a short circuit or power surge, can safely pass through to the ground.

An isolation transformer achieves protection by creating a physical separation between your boat and the onshore hookup. They replace the wired connection with an electromagnetic connection – power passes through the air by an electromagnetic field. This physical gap prevents the low voltage battery effect from occurring.

Galvanic isolators and isolation transformers – pros and cons

A galvanic isolator is significantly cheaper and simpler than an isolation transformer. This simplicity results in a tradeoff in reliability. Galvanic isolators are prone to damage by surges and lightning, meaning that you need to periodically check your isolator to make sure it’s still working. An isolation transformer is very resilient to power surges and lightning strikes – it’s an ‘install and forget’ device.

Additionally, galvanic isolators can only protect against currents lower than 1.4V. When connected to a shore hookup that’s working properly, this isn’t a problem. However, a shore hookup that’s slightly faulty can result in a ground connection which carries a voltage. This small voltage won’t cause a detectable problem in itself, but it can be enough to bypass the galvanic isolator, eliminating the corrosion protection that it provides. An isolation transformer doesn’t have this weakness.

Isolation transformers also perform other functions besides protection from galvanic corrosion. An isolation transformer is able to accommodate a wide range of input voltages, making them popular with people who travel the world in their boats and connect to onshore hookups with differing voltages.

Besides the higher cost, the other main drawback of an isolation transformer is its significant size and weight.

Which one is right for me?

In short, a galvanic isolator is a relatively cheap and simple device that will protect your boat from galvanic corrosion under most circumstances. However, it does nothing else and can fail or be bypassed, requiring it to be regularly checked, and replaced if necessary.

A galvanic isolator will not fail and won’t need replacing, and in addition it allows you to connect to almost any onshore hookup in the world.

Cost, resilience, and flexibility should determine whether you choose either a galvanic isolator or an isolation transformer for your boat.

We also sell isolation transformers in our shop; check them out here.

The Sterling Galvanic isolator – over-engineered for a very high level of safety

The new Pro Save W offers all the above protection, but in a waterproof plastic package with stainless steel hardware.  Further safety comes from an induction fan cooling system, which only operates when the unit is in a major fault condition. This ensures that in full fault condition the product does not exceed 90°C.

The Sterling galvanic isolator also incorporates two LED warning lights, for easy fault communication. The two warning lights indicate the following:

  1. Breakthrough fault, i.e. the earth voltage has exceeded the ability of the device to protect the system. This can only happen very rarely under exceptional circumstances.
  2. Total failure due to massive short circuit way beyond the products ability to protect. This would mean that the product has failed and the boat and personnel are in danger.

If your boat and the shore power systems have appropriate safety devices (fuses and trips), it not possible to destroy this product under any fault condition. Total failure can only occur with another underlying event, or an incorrectly rated product on the circuit. The over engineered aspect of this product cannot be overstated.

This product complies to European standard EN ISO13297, but isn’t suitable on boats requiring a UL certificate or ABYC standard.

Looking for a differently sized galvanic isolator?

Take a look at our other options here.

Products that give back

We are members of 1% for the Planet. This means that for every product purchased from Climbingvan, we will give 1% of the total cost to The Honnold Foundation, to provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchasing your components from us at Climbingvan will mean you can give back as well as powering your off-grid system.

Product SKU: ZSW32

Additional information

Weight 1 kg
Dimensions 15 × 12 × 11.8 cm
Brand

Continuous current rating

32A

Protection rating

IP68

Warranty

2 years

Current (A)

32

Reviews

There are no reviews yet.

Be the first to review “Sterling Galvanic Isolator 32A – Zinc Saver – Pro Save W (Waterproof)”

Your email address will not be published. Required fields are marked *

    Your cart is emptyReturn to Shop

      Want to modify this kit?

      Fill out the form below and one of our engineers will be in touch soon.

      team

      Got a question? Fill out the form below and someone from the team will be in touch soon.

      We donate 1% of our revenue to The Honnold Foundation as a part of our 1% for the Planet commitment, to advance access to solar energy all over the world. You can find out more about the amazing work The Honnold Foundation does here.

       

      How does it work?

      You place an order

      If you place an order for £250, we will donate £2.50 at no extra cost to you.

      We donate 1%

      Each quarter we donate 1% of our revenue to The Honnold Foundation.

      The world benefits

      Our donation is used to provide those that need it most access to solar energy.

      We offer a range of 0% interest credit options from PayPal Credit and Klarna, so you can spread the cost of your purchase over 30 days, 4 months or 1 year, at no extra cost to you.

      PayPal Credit up to £2,000

      Klarna Credit up to £1,000

      How does it work?

      Add to Basket

      Add the items you wish to purchase to your basket.

      Choose how to pay

      Pay with PayPal Credit or Klarna whichever works best for you.

      Apply for credit

      Get an instant decision and, if approved, complete your purchase.

      Subject to status. Min monthly payment applies. Terms apply. UK residents only. For full details please proceed to checkout and select your preferred credit option.

      Where do you live?

      UK

      USA