fbpx

Free delivery over £75

Try the ultimate electrical design service

1% for the Planet 

Cart 0

Victron 24V 25A Phoenix Smart IP43 Charger – 1+1 Outputs

The Victron 24V 25A Phoenix Smart IP43 Charger is a 4 stage charger: bulk, absorption, float and storage. It has one full rated output of 25A and one 3A output to trickle charge the starter battery.

  • 25A charging current
  • Suitable for 24V systems
  • IP43 rated
  • 3A output to trickle charge starter battery

£472.50

In stock - 1-2 Day Dispatch

£472.50

Confused about electrics? Our free electrical system design service makes off-grid energy simple.

Description

With boat owners in mind this adaptive 5-step charger can provide either 30A or 50A of charge to each of three battery banks. Or the Phoenix 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank. 24V models are available with 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below.

 

Features

Bluetooth Smart enabled

Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

Phoenix Smart (1+1): two outputs to charge 2 battery banks

The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.

Automatic voltage compensation

The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.

Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage

The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.

The right amount of charge: variable absorption time

When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.

Preventing damage due to excessive gassing: the BatterySafe mode

If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached

Less maintenance and aging when the battery is not in use: the Storage Mode

The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteries

Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively full control of voltage and current can be achieved with Bluetooth.

Fully programmable charge algorithm

The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button (see specifications).

Remote on-off

The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. See manual for details.

VE.Direct interface

For a wired data connection to a Color Control panel, PC or other devices. Please see the VictronConnect app under Downloads / Software on our website.

Programmable relay

Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.

Product SKU: PSC242551085

Additional information

Weight 3.5 kg
Dimensions 18 × 24.9 × 10 cm
Brand

Manufacturer Part Number

PSC242551085

Voltage

24V

Battery charger rating

25A

Input Voltage

230V

Number of Outputs

1+1

Protection Category

IP43 (electronic components), IP22 (connection area)

Efficiency

0.94

Bluetooth Enabled

Yes

Warranty

5 Years

Country of Manufacture

Malaysia

Reviews

There are no reviews yet.

Be the first to review “Victron 24V 25A Phoenix Smart IP43 Charger – 1+1 Outputs”

Your email address will not be published. Required fields are marked *

    Your cart is emptyReturn to Shop

      Want to modify this kit?

      Fill out the form below and one of our engineers will be in touch soon.

      team

      Got a question? Fill out the form below and someone from the team will be in touch soon.

      We donate 1% of our revenue to The Honnold Foundation as a part of our 1% for the Planet commitment, to advance access to solar energy all over the world. You can find out more about the amazing work The Honnold Foundation does here.

       

      How does it work?

      You place an order

      If you place an order for £250, we will donate £2.50 at no extra cost to you.

      We donate 1%

      Each quarter we donate 1% of our revenue to The Honnold Foundation.

      The world benefits

      Our donation is used to provide those that need it most access to solar energy.

      We offer a range of 0% interest credit options from PayPal Credit and Klarna, so you can spread the cost of your purchase over 30 days, 4 months or 1 year, at no extra cost to you.

      PayPal Credit up to £2,000

      Klarna Credit up to £1,000

      How does it work?

      Add to Basket

      Add the items you wish to purchase to your basket.

      Choose how to pay

      Pay with PayPal Credit or Klarna whichever works best for you.

      Apply for credit

      Get an instant decision and, if approved, complete your purchase.

      Subject to status. Min monthly payment applies. Terms apply. UK residents only. For full details please proceed to checkout and select your preferred credit option.

      Where do you live?

      UK

      USA