Free delivery over £75

Try the ultimate electrical design service

1% for the Planet 

Cart 0

Victron Battery Protect 220A – 12/24V

The Victron BatteryProtect is designed to protect a leisure battery in an electrical system. It disconnects the battery from non-essential loads before it is completely discharged, which would damage the battery. The BatteryProtect is not designed for reverse currents from charging sources.

  • Suitable for loads up to 220A
  • Suitable for 12V and 24V systems
  • Non-smart model


In stock - 1-2 Day Dispatch


Confused about electrics? Our free electrical system design service makes off-grid energy simple.


The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.


The BatteryProtect is not designed for reverse currents from charging sources.



12/24V auto ranging

The BatteryProtect automatically detects system voltage.


Programming made easy

The BatteryProtect can be set to engage / disengage at several different voltages.

The seven segment display will indicate which setting has been chosen.


A special setting for Li-ion batteries

In this mode the BatteryProtect can be controlled by the VE.Bus BMS.


Ultra low current consumption

This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.


Over voltage protection

To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.


Ignition proof

No relays but MOSFET switches, and therefore no sparks.


Delayed alarm output

The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.


Delayed load disconnect and delayed reconnect

The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.

The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Product SKU: BPR000220400

Additional information

Weight 0.8 kg
Dimensions 6.2 × 12.3 × 12 cm

Manufacturer Part Number



12V, 24V

Current rating (A)


Peak Current (During 30 Seconds)


Operating Voltage Range

6 –35V

Alarm Output Delay

12 seconds

Max. Load on Alarm Output

50 mA

Load Disconnect Delay

90 seconds

Load Reconnect Delay

30 seconds

Protection Category

Electronics: IP67 (potted), Connections: IP00



Mounting Torque

9 Nm

Bluetooth Enabled


Smart functionality



5 Years


There are no reviews yet.

Be the first to review “Victron Battery Protect 220A – 12/24V”

Your email address will not be published. Required fields are marked *

    Your cart is emptyReturn to Shop

      Want to modify this kit?

      Fill out the form below and one of our engineers will be in touch soon.


      Got a question? Fill out the form below and someone from the team will be in touch soon.

      We donate 1% of our revenue to The Honnold Foundation as a part of our 1% for the Planet commitment, to advance access to solar energy all over the world. You can find out more about the amazing work The Honnold Foundation does here.


      How does it work?

      You place an order

      If you place an order for £250, we will donate £2.50 at no extra cost to you.

      We donate 1%

      Each quarter we donate 1% of our revenue to The Honnold Foundation.

      The world benefits

      Our donation is used to provide those that need it most access to solar energy.

      We offer a range of 0% interest credit options from PayPal Credit and Klarna, so you can spread the cost of your purchase over 30 days, 4 months or 1 year, at no extra cost to you.

      PayPal Credit up to £2,000

      Klarna Credit up to £1,000

      How does it work?

      Add to Basket

      Add the items you wish to purchase to your basket.

      Choose how to pay

      Pay with PayPal Credit or Klarna whichever works best for you.

      Apply for credit

      Get an instant decision and, if approved, complete your purchase.

      Subject to status. Min monthly payment applies. Terms apply. UK residents only. For full details please proceed to checkout and select your preferred credit option.

      Where do you live?

      UK & EU