Free delivery over £75

Try the ultimate electrical design service

1% for the Planet 

Cart 0

Victron 3600W Isolation Transformer – Toroidal Isolation Transformer

Victron isolation transformers provide protection from galvanic corrosion, and from short circuits and power surges in your vessel. They also allow you to connect to a wide range of onshore hookup voltages.

  • Protects against galvanic corrosion
  • Reliably and repeatedly protects from short circuits, power surges, and lightning strikes
  • Accepts input voltages from 88V to 250V
  • Toroidal wound technology results in quietness, lower weight, and higher efficiency
  • Soft start circuitry ensures that shore power breaker won’t trip when plugged in


In stock - 1-2 Day Dispatch


Confused about electrics? Our free electrical system design service makes off-grid energy simple.


Victron Isolation Transformer 3600W – Marine isolation transformer for galvanic protection

The Victron Isolation transformer 3600W provides protection from galvanic corrosion, and from short circuits and power surges in your vessel.

Why do you need an isolation transformer?

Galvanic corrosion happens to all metal components on a boat that are exposed to seawater. Normally, your sacrificial anodes are enough protect your shaft and propeller from galvanic corrosion. However, when you connect to an onshore electrical hookup, safety demands that you also be connected to an onshore ground. This essentially creates a low voltage battery, incorporating your boat, the water, and the ground. Without any sort of protection, the current flow through this battery will significantly speed up the galvanic corrosion process.

You can protect against this battery effect by installing either a galvanic isolator or an isolation transformer.

Galvanic isolators and isolation transformers

Both galvanic isolators and isolation transformers achieve the same thing. They isolate your boat from the low voltage battery effect, protecting underwater metals from corrosion and preventing your sacrificial anodes from wasting too quickly. The difference is in how they achieve this.

A galvanic isolator is a small, lightweight device that prevents low voltage currents from passing between your boat and the shore. Because the battery effect current is generally less than 1V, it can’t pass, and your boat is protected. At the same time, high voltage currents, such as those that happen during a short circuit or power surge, can safely pass through to the ground.

An isolation transformer achieves protection by creating a physical separation between your boat and the onshore hookup. They replace the wired connection with an electromagnetic connection – power passes through the air by an electromagnetic field. This physical gap prevents the low voltage battery effect from occurring.

Galvanic isolators and isolation transformers – pros and cons

A galvanic isolator is significantly cheaper and simpler than an isolation transformer. This simplicity results in a tradeoff in reliability. Galvanic isolators are prone to damage by surges and lightning, meaning that you need to periodically check your isolator to make sure it’s still working. An isolation transformer is very resilient to power surges and lightning strikes – it’s an ‘install and forget’ device.

Additionally, galvanic isolators can only protect against currents lower than 1.4V. When connected to a shore hookup that’s working properly, this isn’t a problem. However, a shore hookup that’s slightly faulty can result in a ground connection which carries a voltage. This small voltage won’t cause a detectable problem in itself, but it can be enough to bypass the galvanic isolator, eliminating the corrosion protection that it provides. An isolation transformer doesn’t have this weakness.

Isolation transformers also perform other functions besides protection from galvanic corrosion. An isolation transformer is able to accommodate a wide range of input voltages, making them popular with people who travel the world in their boats and connect to onshore hookups with differing voltages.

Besides the higher cost, the other main drawback of an isolation transformer is its significant size and weight.

Which one is right for me?

In short, a galvanic isolator is a relatively cheap and simple device that will protect your boat from galvanic corrosion under most circumstances. However, it does nothing else and can fail or be bypassed, requiring it to be regularly checked, and replaced if necessary.

A galvanic isolator will not fail and won’t need replacing, and in addition it allows you to connect to almost any onshore hookup in the world.

Cost, resilience, and flexibility should determine whether you choose either a galvanic isolator or an isolation transformer for your boat.

We also sell galvanic isolators in our shop; check them out here.

Looking for a differently sized isolation transformer?

Take a look at our other options here.

Products that give back

We are members of 1% for the Planet. This means that for every product purchased from Climbingvan, we will give 1% of the total cost to The Honnold Foundation, to provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchasing your components from us at Climbingvan will mean you can give back as well as powering your off-grid system.

Product SKU: ITR050362041

Additional information

Weight 10 kg
Dimensions 36.2 × 25.8 × 21.8 cm

Input voltage

88V – 250V

Output voltage

115V or 230V

Transformer type

Toroidal (low noise, low weight)

Input circuit breaker



5 years


There are no reviews yet.

Be the first to review “Victron 3600W Isolation Transformer – Toroidal Isolation Transformer”

Your email address will not be published. Required fields are marked *

    Your cart is emptyReturn to Shop

      Want to modify this kit?

      Fill out the form below and one of our engineers will be in touch soon.


      Got a question? Fill out the form below and someone from the team will be in touch soon.

      We donate 1% of our revenue to The Honnold Foundation as a part of our 1% for the Planet commitment, to advance access to solar energy all over the world. You can find out more about the amazing work The Honnold Foundation does here.


      How does it work?

      You place an order

      If you place an order for £250, we will donate £2.50 at no extra cost to you.

      We donate 1%

      Each quarter we donate 1% of our revenue to The Honnold Foundation.

      The world benefits

      Our donation is used to provide those that need it most access to solar energy.

      We offer a range of 0% interest credit options from PayPal Credit and Klarna, so you can spread the cost of your purchase over 30 days, 4 months or 1 year, at no extra cost to you.

      PayPal Credit up to £2,000

      Klarna Credit up to £1,000

      How does it work?

      Add to Basket

      Add the items you wish to purchase to your basket.

      Choose how to pay

      Pay with PayPal Credit or Klarna whichever works best for you.

      Apply for credit

      Get an instant decision and, if approved, complete your purchase.

      Subject to status. Min monthly payment applies. Terms apply. UK residents only. For full details please proceed to checkout and select your preferred credit option.

      Where do you live?