Victron Energy Smart Battery Protect 12/24V 100A – BPR110022000
The Victron Smart BatteryProtect is designed to protect a leisure battery in an electrical system. It disconnects the battery from non-essential loads before it is completely discharged, which would damage the battery. The BatteryProtect is not designed for reverse currents from charging sources. The Smart BatteryProtect has built-in Bluetooth, allowing you to programme and monitor the device using the VictronConnect app. This is the 100A Smart Battery Protect but we also offer the 65A model which is most commonly used to protect non-essential 12V loads.
The BatteryProtect can be set to engage or disengage at several different voltages.
There is also a special setting for lithium batteries. If you have a system with a Victron Smart lithium battery, the BatteryProtect can be controlled by the VE.Bus BMS.
The Victron Smart Battery Protect is easy to set up using the VictronConnect App, which can be downloaded from the app store on Android or iOS devices.
Delayed alarm and load disconnect
The alarm output is activated if the battery voltage drops below the preset disconnect level. The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.
Products that give back
We are members of 1% for the Planet. This means that for every product purchased from Climbingvan, 1% of the total cost will be given to The Honnold Foundation, to provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchasing your components from us at Climbingvan will mean you can give back as well as powering your off-grid system.
Product SKU: BPR110022000