fbpx

Victron Energy Pure Sine Wave Inverter: Phoenix Smart Inverter 12/2000

Victron Energy Inverters allow you to power domestic equipment – requiring 230V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V DC.

Smart product: can be monitored using the Victron Connect app, remote monitors or VRM portal
Max constant power 2000W
Peak power 4000W

£860.40 £752.86

nomadic_energy_free_campervan_electrical_system_design
nomadic energy free campervan electrical system design service campervan electrical consultancy

Confused about electrics? Our free electrical system design service makes off-grid energy simple.

Description

Phoenix Inverter 12V 2000VA Smart (PIN122200000)

Bluetooth built-in: fully configurable with a tablet or smartphone
– Low battery voltage alarm
– Low battery voltage cut-off and restart levels
– Dynamic cut-off: load dependent cut-off level
– Output voltage: 210 – 245V
– Frequency: 50 Hz or 60 Hz
– ECO mode on/off and ECO mode sense level
– Alarm relay Monitoring:
– In- and output voltage, load and alarms

VE.Direct communication port

The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.

Remote on/off

A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

LED diagnosis

Please see manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.

Additional information

Weight 13 kg
Dimensions 52 × 25.5 × 12.5 cm
Brand

Victron Energy

Manufacturer Part Number

PIN122200000

Voltage

12

VA

2000

Peak Power (W)

4000

Max Efficiency

92%

IP Rating

IP21

Weight (kg)

13

Dimensions

H485 x W219 x D125mm

Warranty

5 years

Disclaimer: We are participants in the Amazon Services LLC Associates Program. As associates we may earn from qualifying purchases. We may also participate in other affiliate programs at our discretion. Most outbound links are affiliate links – we may earn commission. But we are independently owned and operated, and we believe in honest opinions. All opinions expressed here are our own, and are the result of direct experience or extensive research. Learn more >

0
    Your cart is empty

    This site uses cookies to provide the best possible experience. Read more.