500VA MultiPlus Kit – Includes Victron 500VA 12V MultiPlus inverter/charger & all required components
This MultiPlus kit includes everything you need to wire the 12V Victron MultiPlus 500VA inverter/charger as part of your campervan electrical system. It includes:
- Victron MultiPlus 500VA 12V inverter/charger
- 2x consumer units
- Required DC cable & cable lugs
- 20m x 3 core cable
Plus, pick from the following variables:
- Blue Sea 300A switch (optional – if you would like to be able to isolate the MultiPlus from your system)
- Shore inlet (select from Victron polyamide or Victron steel options – both rated to 16A)
- Shore hookup cable (optional – select if required, 15m and 25m options available. Please note that the Victron shore inlet is only compatible with Victron branded hookup cables)
Victron 500VA MultiPlus kit
Our Victron MultiPlus kits include everything you need to connect an inverter/charger subsystem to your electrical system. All cabling, fuses, cable lugs, etc. are included, as well as a number of optional extras to enhance the system.
We supply consumer units which contain 1x 25A RCD, 1x 10A MCB and 1x 6A MCB.
The DC cable gauge is specced on the distance between the MultiPlus and your busbars being no longer than 1.5m each way (3m ‘there and back again’ length). If your inverter/charger will be further away than this, please contact us so we can provide a system proposal with the correct cable gauge.
We supply 20m of 3 core cable. This is used to connect the shore inlet, consumer units and MultiPlus, as well as wire any 230V sockets and appliances. If you require more cable than this you can add additional 3 core cable to your order separately.
You have the option to add a Blue Sea 300A switch. This allows you to easily isolate the subsystem from the rest of your electrical system.
If you have a Cerbo GX in your electrical system, you will just need to add a single RJ45 cable to connect this to the MultiPlus.
Choose from the Victron polyamide or Victron steel shore power inlet. Both are rated to 16A.
Select if you would like to include a Victron shore hookup cable. It’s not possible to use an unbranded hookup cable with the Victron inlets, so if you don’t already have one you should include this.
Wiring diagram & installation guidance
All of our kits are supplied with a subsystem wiring diagram and installation guidance. This includes information on setting up the MultiPlus correctly using the DIP switches. So, you can install your system easily and be confident it’s installed correctly. If you need any support during the install, contact us and we can provide additional support.
Looking for a different Victron MultiPlus kit?
View the full range of Victron MultiPlus kits, rated from 500VA-3000VA, available in 12V and 24V.
Victron 500VA MultiPlus inverter/charger – use case
The Victron MultiPlus 500VA inverter/charger is suitable for off-grid electrical system applications such as for use in campervans, motorhomes, RVs and boats. It is suitable for anyone whose mains power appliances equal a total wattage of 500VA or less. As the Victron MultiPlus is an inverter/charger, it will also allow the system to be charged via shore power when connected to hookup.
Products that give back
We are members of 1% for the Planet. This means that for every product purchased from Climbingvan, we will give 1% of the total cost to The Honnold Foundation, who provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchase your components from Climbingvan. So, you can give back as well as powering your off-grid system.